9 Star 81 Fork 104

OpenHarmony / device_hisilicon_hispark_taurus

加入 Gitee
与超过 1200万 开发者一起发现、参与优秀开源项目,私有仓库也完全免费 :)
免费加入
克隆/下载
贡献代码
同步代码
取消
提示: 由于 Git 不支持空文件夾,创建文件夹后会生成空的 .keep 文件
Loading...
README
Apache-2.0

HiSpark_taurus介绍

简介

hispark_taurus仓为hi3516dv300芯片的底层处理驱动,为“媒体/图形子系统”提供基础的多媒体处理功能。主要功能有:音视频采集、音视频编解码、音视频输出、视频前处理、封装、解封装、文件管理、存储管理、日志系统等。如图1所示。

图 1 多媒体子系统架构图

目录

/device/hisilicon/hispark_taurus/sdk_liteos
├── config                 # Hi3516DV300设备配置信息
├── mpp
│   ├── lib               # Hi3516DV300芯片的媒体库文件、LICENSE文件
│   └── module_init       # Hi3516DV300芯片媒体各模块驱动对应的库、LICENSE文件
└── uboot
    ├── out                # 采用third_party\uboot\u-boot-2020.01编译成的U-Boot
    ├── reg                # U-Boot配置文件、LICENSE文件
    ├── secureboot_ohos    # 安全启动相关的编译脚本
    └── secureboot_release # 生成安全U-Boot的源代码、License目录

/device/hisilicon/hispark_taurus/sdk_linux/soc
├── ko              # Hi3516DV300芯片的内核模块加载脚本
├── lib             # Hi3516DV300芯片的媒体图形库文件、LICENSE文件
└── src             # Hi3516DV300芯片的linux内核驱动模块源码、LICENSE文件
    ├── interdrv    # 外设模块
    │   ├── common  # 各芯片通用模块
    │   │   ├── cipher    # 加解密模块
    │   │   ├── hi_adc    # adc总线控制器
    │   │   ├── hi_ir     # 红外控制器
    │   │   ├── hi_irq    # 用户态驱动中断注册管理模块
    │   │   ├── hi_proc   # 调试信息管理模块
    │   │   └── wtdg      # 看门狗
    │   └── hi3516cv500   # 芯片相关模块
    │       ├── mipi_rx   # mipi协议rx方向
    │       ├── mipi_tx   # mipi协议tx方向
    │       └── sysconfig  # 系统管脚配置相关配置
    ├── mpp  # 图形媒体相关模块
    │   ├── cbb
    │   │   ├── based # 日志相关功能
    │   │   ├── sysd  # 系统基础模块,提供内存、模块绑定等功能
    │   │   └── vo    # video output
    │   └── component
    │       ├── hdmi  # HDMI接口输出
    │       ├── hifb  # frame buffer管理
    │       └── tde   # Two Dimensional Engine
    └── osal             # 驱动适配层,用于屏蔽系统差异,提供统一接口

约束

当前支持Hi3516DV300芯片。

编译构建

  • 编译uboot
  1. 从开源社区(https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads\)下载GCC工具链,当前用于编译uboot的工具链版本为gcc-arm-none-eabi-7-2017-q4-major-linux.tar.bz2,也可以选择其他的GCC版本。
  2. 将GCC工具链拷贝到prebuilts目录,并解压。
  3. 进入hispark_taurus\uboot\out\boot目录,修改该目录下的Makefile中的OSDRV_CROSS所定义的工具链的路径。
  4. 编译U-Boot,命令:make clean;make all;

生成的U-Boot存放在hispark_taurus\uboot\out\boot目录下。

备注:prebuilts\mkimage由uboot源码生成。

hispark_taurus协议说明

  • hispark_taurus\sdk_linux\soc\lib里面为上海海思的自研库,遵循上海海思的LICENSE,这个目录下有LICENSE文件,LICENSE文件中可以看到版权信息:

    / *End User License Agreement ...  Copyright (C) 2021 Hisilicon (Shanghai) Technologies Co., Ltd. All rights reserved. * /
  • hispark_taurus\sdk_linux\soc\src目录下为上海海思自研代码,使用基于GPL许可的Hisilicon (Shanghai) 版权声明,在该目录下有License目录,许可信息和版权信息通常可以在文件开头看到:

     / *Copyright (c) 2021 HiSilicon (Shanghai) Technologies CO., LIMITED. 
       *
       * This program is free software; you can redistribute  it and/or modify it
       * under  the terms of  the GNU General  Public License as published by the
       * Free Software Foundation;  either version 2 of the  License, or (at your
       * option) any later version.
       * ... * /
  • hispark_taurus\prebuilts目录下为boot源码编译出的工具,源码在device\hisilicon\third_party\uboot\u-boot-2020.01路径下,prebuilts使用基于End User License Agreement许可的Hisilicon (Shanghai) 版权声明,在该目录下有End User License Agreement 的LICENSE文件,许可信息和版权信息通常可以在文件中看到:

     / *End User License Agreement ...  Copyright (C) 2021 Hisilicon (Shanghai) Technologies Co., Ltd. All rights reserved. * /
  • hispark_taurus\sdk_linux\uboot\reg目录为上海海思自研代码,使用基于End User License Agreement许可的Hisilicon (Shanghai) 版权声明,在该目录下有End User License Agreement的LICENSE文件,许可信息和版权信息通常可以在文件中看到:

    / *End User License Agreement ...  Copyright (C) 2021 Hisilicon (Shanghai) Technologies Co., Ltd. All rights reserved. * /
  • hispark_taurus\sdk_liteos\mpp\module_init\lib和hispark_taurus\sdk_liteos\mpp\lib里面为上海海思的自研库,遵循上海海思的LICENSE,这两个目录下均有LICENSE文件,LICENSE文件结尾可以看到版权信息:

    Copyright (C) 2020 Hisilicon (Shanghai) Technologies Co., Ltd. All rights reserved.
  • hispark_taurus\sdk_liteos\mpp\module_init\src目录下为上海海思自研代码,使用基于Apache License Version 2.0许可的Hisilicon (Shanghai) 版权声明,在该目录下有Apache License Version 2.0的LICENSE文件,许可信息和版权信息通常可以在文件开头看到:

     / *Copyright (c) 2020 HiSilicon (Shanghai) Technologies CO., LIMITED. Licensed under the Apache License,* ... * / 
  • hispark_taurus\sdk_liteos\uboot\reg为上海海思的二进制文件,遵循上海海思的LICENSE,该目录下有LICENSE文件,LICENSE文件结尾可以看到:

    Copyright (C) 2020 Hisilicon (Shanghai) Technologies Co., Ltd. All rights reserved.
  • hispark_taurus\sdk_liteos\uboot\out\boot是由u-boot-2020.01和reg_info_hi3518ev300.bin编译成的U-Boot二进制文件,完全遵从u-boot-2020.01的整体协议,具体请参看third_party\uboot\u-boot-2020.01\Licenses目录下的README。

  • hispark_aries\sdk_liteos\uboot\secureboot_release为安全U-Boot的开源代码,其中自研的部分使用基于GPL许可的Hisilicon (Shanghai) 版权声明,在该目录下有License目录,许可信息和版权信息通常可以在文件开头看到:

     / *Copyright (c) 2020 HiSilicon (Shanghai) Technologies CO., LIMITED. 
       *
       * This program is free software; you can redistribute  it and/or modify it
       * under  the terms of  the GNU General  Public License as published by the
       * Free Software Foundation;  either version 2 of the  License, or (at your
       * option) any later version.
       * ... * / 
  • hispark_taurus\NOTICE文件描述了使用到的三款开源软件:Das U-Boot 2020.01、mbed TLS 2.16.6、fdk-aac v2.0.1。

third_party许可说明

third_party\ffmpeg\ffmpeg-y为ffmpeg开源代码,遵循软件版本自带的开源许可声明,具体请参看third_party\ffmpeg\ffmpeg-y目录下的README。

third_party\uboot\u-boot-2020.01为U-Boot开源代码,遵循软件版本自带的开源许可声明,具体请参看third_party\uboot\u-boot-2020.01\Licenses目录下的README。

相关仓

device/hisilicon/build

device/hisilicon/drivers

device/hisilicon/hardware

device/hisilicon/hispark_taurus

device/hisilicon/modules

device/hisilicon/third_party/ffmpeg

device/hisilicon/third_party/uboot

vendor/hisilicon

# hispark\_taurus<a name="EN-US_TOPIC_0000001142448981"></a> - [Introduction](#section11660541593) - [Directory Structure](#section161941989596) - [Constraints](#section119744591305) - [Compilation and Building](#section137768191623) - [hispark\_taurus License Agreement](#section1312121216216) - [third\_party License Notice](#section129654513264) - [Repositories Involved](#section1371113476307) ## Introduction<a name="section11660541593"></a> The **hispark\_taurus** repository provides drivers for the Hi3516D V300 chip and provides basic multimedia capabilities for the Multimedia and Graphics subsystems. including audio/video collection, audio/video encoding and decoding, audio/video output, video pre-processing, encapsulation, decapsulation, file management, storage management, and log system. The following figure shows the architecture of the Multimedia subsystem. **Figure 1** Multimedia subsystem architecture<a name="fig4460722185514"></a> ![](figures/en-us_image_0000001095808970.png) ## Directory Structure<a name="section161941989596"></a> ``` /device/hisilicon/hispark_taurus/sdk_liteos ├── config # Hi3516D V300 device configuration information ├── mpp │ ├── lib # Media library files and license files of Hi3516D V300 │ └── module_init # Libraries and license files of corresponding media module drivers of Hi3516D V300 └── uboot ├── out # U-Boot compiled using third_party\uboot\u-boot-2020.01 ├── reg # U-Boot configuration files and license files ├── secureboot_ohos # Compilation scripts for securely booting OpenHarmony └── secureboot_release # Source code and license files for generating secure U-Boot files /device/hisilicon/hispark_taurus/sdk_linux/soc ├── ko # Kernel module loading script for the Hi3516D V300 chip ├── lib # Media and graphics library files and license files for the Hi3516D V300 chip └── src # Linux kernel driver module source code and license files for the Hi3516D V300 chip ├── interdrv # Peripheral modules │ ├── common # Common modules for all chips │ │ ├── cipher # Encryption/Decryption module │ │ ├── hi_adc # ADC bus controller │ │ ├── hi_ir # IR controller │ │ ├── hi_irq # IRQ management module of the user-space driver │ │ ├── hi_proc # Debugging information management module │ │ └── wtdg # Watchdog │ └── hi3516cv500 # Chip-specific modules │ ├── mipi_rx # RX direction of the MIPI protocol │ ├── mipi_tx # TX direction of the MIPI protocol │ └── sysconfig # System configurations ├── mpp # Graphics and multimedia modules │ ├── cbb │ │ ├── based # Logging functions │ │ ├── sysd # Basic system module that provides memory and module binding functions │ │ └── vo # video output │ └── component │ ├── hdmi # HDMI output │ ├── hifb # Frame buffer management │ └── tde # Two Dimensional Engine └── osal # Operating system abstraction layer, which shields system differences and provides unified interfaces ``` ## Constraints<a name="section119744591305"></a> Currently, the Hi3516D V300 chip is supported. ## Compilation and Building<a name="section137768191623"></a> - Compiling U-Boot 1. Download the GCC toolchain from [https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads](https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-rm/downloads). Currently, the toolchain version for compiling U-Boot is **gcc-arm-none-eabi-7-2017-q4-major-linux.tar.bz2**. You can also select other GCC versions. 2. Copy the GCC toolchain to the **prebuilts** directory and decompress it. 3. Go to the **hispark\_taurus\\uboot\\out\\boot** directory and modify the path of the toolchain defined by **OSDRV\_CROSS** in the **makefile** of the directory. 4. Run the **make clean;make all;** command to compile the U-Boot. The generated U-Boot is stored in the **hispark\_taurus\\uboot\\out\\boot** directory. Note: **prebuilts\\mkimage** is generated by the U-Boot source code. ## hispark\_taurus License Agreement <a name="section1312121216216"></a> - The **hispark\_taurus\\sdk\_linux\\soc\\lib** directory stores the HiSilicon-developed libraries, which comply with the license of HiSilicon \(Shanghai\). You can see the following license and copyright information in the license file stored in this directory: ``` / *End User License Agreement ... Copyright (C) 2021 HiSilicon (Shanghai) Technologies Co., Ltd. All rights reserved. * / ``` - The **hispark\_taurus\\sdk\_linux\\soc\\src** directory stores the HiSilicon-developed code, which complies with the HiSilicon \(Shanghai\) copyright statement based on GPL. You can see the following license and copyright information at the beginning of the license file stored in this directory: ``` / *Copyright (c) 2021 HiSilicon (Shanghai) Technologies CO., LIMITED. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * ... * / ``` - The **hispark\_taurus\\prebuilts** directory stores the tools generated using the boot source code that is stored in the **device\\hisilicon\\third\_party\\uboot\\u-boot-2020.01** directory. prebuilts uses the Hisilicon \(Shanghai\) copyright statement based on the end-user license agreement. You can see the following license and copyright information in the license file stored in the **hispark\_taurus\\prebuilts** directory: ``` / *End User License Agreement ... Copyright (C) 2021 HiSilicon (Shanghai) Technologies Co., Ltd. All rights reserved. * / ``` - The **hispark\_taurus\\sdk\_linux\\uboot\\reg** directory stores the HiSilicon-developed code, which complies with the HiSilicon \(Shanghai\) copyright statement based on the end-user license agreement. You can see the following license and copyright information in the license file stored in this directory: ``` / *End User License Agreement ... Copyright (C) 2021 Hisilicon (Shanghai) Technologies Co., Ltd. All rights reserved. * / ``` - The **hispark\_taurus\\sdk\_liteos\\mpp\\module\_init\\lib** and **hispark\_taurus\\sdk\_liteos\\mpp\\lib** directories store the HiSilicon-developed libraries, which comply with the license of HiSilicon \(Shanghai\). You can see the following license and copyright information at the end of license files that are stored in the two directories: ``` Copyright (C) 2020 Hisilicon (Shanghai) Technologies Co., Ltd. All rights reserved. ``` - The **hispark\_taurus\\sdk\_liteos\\mpp\\module\_init\\src** directory stores the HiSilicon-developed code, which complies with the HiSilicon \(Shanghai\) copyright statement based on the Apache License Version 2.0. You can see the following license and copyright information at the beginning of the license file that is stored in this directory: ``` / *Copyright (c) 2020 HiSilicon (Shanghai) Technologies CO., LIMITED. Licensed under the Apache License,* ... * / ``` - The **hispark\_taurus\\sdk\_liteos\\uboot\\reg** directory stores a binary file, which complies with the license of HiSilicon \(Shanghai\). You can see the following copyright information at the end of a license file that is stored in this directory: ``` Copyright (C) 2020 Hisilicon (Shanghai) Technologies Co., Ltd. All rights reserved. ``` - The **hispark\_taurus\\sdk\_liteos\\uboot\\out\\boot** directory stores a binary U-Boot file compiled using **u-boot-2020.01** and **reg\_info\_hi3518ev300.bin** and following the **u-boot-2020.01** protocol. For details, see the readme files in the **third\_party\\uboot\\u-boot-2020.01\\Licenses** directory. - The **hispark\_aries\\sdk\_liteos\\uboot\\secureboot\_release** directory stores the open-source code of secure U-Boot, in which the HiSilicon-developed code complies with the HiSilicon \(Shanghai\) copyright statement based on the GPL license. You can see the following license and copyright information at the beginning of the license file that is stored in this directory: ``` / *Copyright (c) 2020 HiSilicon (Shanghai) Technologies CO., LIMITED. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * ... * / ``` - The notice file stored in the **hispark\_taurus\\NOTICE** directory describes three open-source software, namely **Das U-Boot 2020.01**, **mbed TLS 2.16.6**, and **fdk-aac v2.0.1**. ### third\_party License Notice<a name="section129654513264"></a> The **third\_party\\ffmpeg\\ffmpeg-y** directory stores the open-source code of **ffmpeg**, in which the code complies with the open-source license notice of its own software version. For details, see the readme files in the **third\_party\\ffmpeg\\ffmpeg-y** directory. The **third\_party\\uboot\\u-boot-2020.01** directory stores the open-source code of U-Boot, which complies with the open-source license notice of its own software version. For details, see the readme files in the **third\_party\\uboot\\u-boot-2020.01\\Licenses** directory. ## Repositories Involved<a name="section1371113476307"></a> device/hisilicon/build device/hisilicon/drivers device/hisilicon/hardware **device/hisilicon/hispark\_taurus** device/hisilicon/modules device/hisilicon/third\_party/ffmpeg device/hisilicon/third\_party/uboot vendor/hisilicon

简介

(本仓已停止使用)Hi3516DV300 chip driver software, including media drivers, media user-space libraries, and notice files | Hi3516DV300芯片驱动软件,包括:媒体驱动子目录、媒体用户态库子目录、NOTICE文件 展开 收起
C 等 4 种语言
Apache-2.0
取消

发行版 (1)

全部

贡献者

全部

近期动态

加载更多
不能加载更多了
1
https://gitee.com/openharmony/device_hisilicon_hispark_taurus.git
git@gitee.com:openharmony/device_hisilicon_hispark_taurus.git
openharmony
device_hisilicon_hispark_taurus
device_hisilicon_hispark_taurus
master

搜索帮助